Tank Pump System

The method of connecting to the tap depends on the number of DA Rainmaker you have. Ideally you need a valve controlling the flow of water to the sprinkler. 

• One DA - connect the hose directly to the tap 
• Two DA's - add a 2 way splitter to connect the hose 
• Three or four DA's - add a 4 way splitter to connect your hoses.

Please ensure you order the correct size for your tap. ie NSW standard is 1" BSP, VIC standard is 3/4"BSP

We have a variety of connectors to attach your hose to your Rainmaker.

• Brass quick connect.
• Hoselink 
• or none (you use your own) 

Please select the fitting that suits your hose, 

The Rainmaker was originally designed to simply hang off your gutter, we generally place them evey 6 metres. 

If you have gutter mesh then a 50mm slit is required to fit the sprinkler, we generally cut this using a cutting disc on a 100mm offhand grinder. Mark the postion of the sllit for  easy location when needed.

We have also developed a range of products to make hanging the rainmaker easier.

• Pole Adapter - used with a painters extension pole this adapter removes the need to climb a ladder.
• Bolt on Mount - Screws to any verticle flay surface to provide a secure mounting pint.

Activating the sprinkler is simply a case of turning on the valve, having a valve controling each rainmaker allows for fine tuning. They don't need to be spinning flat out to do the job, larger droplets are best.

Purchase one of our bundles, all you need to set up a DA rainmaker sprinkler system