A DA rainmaker sprinkler is designed for lower flow rates and water pressure, ideally suited for the varing water pressure of reticulated or towns water.
Protect your home during ember attack with a DA Rainmaker.
The sprinklers will continue to protect your home while there is water pressure.
The DA Sprinkler provides efficient protection for your home.
Setting up this system is similar to setting up a garden sprinkler.
The method of connecting to the tap depends on the number of DA Rainmaker you have. Ideally you need a valve controlling the flow of water to the sprinkler.
Please ensure you order the correct size for your tap. ie NSW standard is 1" BSP, VIC standard is 3/4"BSP
We have a variety of connectors to attach your hose to your Rainmaker.
Please select the fitting that suits your hose,
The Rainmaker was originally designed to simply hang off your gutter, we generally place them evey 6 metres.
If you have gutter mesh then a 50mm slit is required to fit the sprinkler, we generally cut this using a cutting disc on a 100mm offhand grinder. Mark the postion of the slit for easy location when needed.
We have also developed a range of products to make hanging the rainmaker easier.
Activating the sprinkler is simply a case of turning on the valve, having a valve controling each rainmaker allows for fine tuning. They don't need to be spinning flat out to do the job, larger droplets are best.
Purchase one of our bundles, add hoses to set up your DA rainmaker sprinkler system.