Low Volume & PRESSURE

The method of connecting to the tap depends on the number of DA Rainmaker you have. Ideally you need a valve controlling the flow of water to each sprinkler. 

• One DA - connect the hose directly to the tap 
• Two DA's - add a 2 way splitter to connect the hose 
• Three or four DA's - add a Tee Splitter or 4 way splitter to connect your hoses.

Please ensure you order the correct size for your tap. ie NSW standard is 1" BSP, VIC standard is 3/4"BSP

We have a variety of connectors to attach your hose to your Rainmaker.

• Brass quick connect.
• Hoselink 
• or none (you use your own) 

Please select the fitting that suits your hose, 

The Rainmaker was originally designed to simply hang off your gutter, we generally place them evey 6 metres. 

If you have gutter mesh then a 50mm slit is required to fit the sprinkler, we generally cut this using a cutting disc on a 100mm offhand grinder. Mark the postion of the slit for  easy location when needed.

We have also developed a range of products to make hanging the rainmaker easier.

• Pole Adapter - used with a painters extension pole removes the need to climb a ladder.
• Bolt on Mount - Screws to any verticle flay surface to provide a secure mounting pint.

Activating the sprinkler is simply a case of turning on the valve, having a valve controling each rainmaker allows for fine tuning. They don't need to be spinning flat out to do the job, larger droplets are best.