This is the lowest BAL rating you can receive in a bushfire prone area which indicates that there is risk of ember attack but the possible radiant heat flux exposure will not be greater than 12.5kW per square metre. This rating means there are no special construction requirements.
The Aussie Drencher uses 4 LPM @ 100 KPa to protect a 15M Diameter area.
This Sprinkler is our most water efficient option. You can connected two to each garden tap, up to a total of eight on the mains supply, they will continue to spin until water pressure drops. Connecting to a stand alone fire fighter will ensure the sprinklers continue to operate once the mains pressure drops.
1.0HP GX25 Honda - Australia Assembled - Single Impeller
Actual Output - 235KPa @ 50LMP
The Ultra Lite or our Heavy Duty pump will ensure the sprinklers operate after the mains pressure drops
The Soaker uses 10 LPM @ 150 KPa to protect a 15M Diameter area.
One Sprinkler can be connected to each garden tap, up to a total of 3 on the mains supply, they will operate until water pressure drops to 150 KPa. Connecting to a stand alone fire fighter will ensure the sprinklers continue to operate once the mains pressure drops.
The 12 mm Brass Rainmaker Sprinklers have been designed to clip together with the PVC components. All connectors are interchangeable.
Drencher - Yard Soaker
Yard Saturator
Our Brass hose sets use High Quality Garden Hoses 12mm x 10M and our rainmaker sprinklers. We use our high quality kink resistant hose and the best 12mm Brass connectors available.
Control and direct the water where it is needed with our range of splitters.
We can also fit a brass connector to a fire fighter pump to allow for easy connection once the mains pressure drops.
The RTG Rainmaker Sprinklers have been designed to clip together with the other RTG components. All connectors are interchangeable.
Our custom hoses are available in 12 & 20mm diameter. They and are high quality garden hose, we offer 2 standard lengths 10 & 20M.
The RTG connectors are quality poly camlocks fixed with stainless cobra clamps.
Control and direct the water where it is needed with our range of splitters. They all interconnect using poly camlocks.
We can also fit an RTG Adapter to a fire fighter pump to allow for easy connection once the mains pressure drops.
Our fire pumps have the capacity to supply gutter sprinklers and a fire hose for added protection. Our Australian Assembled Pump with a GX200 Honda engine is built to last and with the right maintenance will serve you for many years to come.