FIXED Rainmaker SPray Heads

Defend your property's perimeter with precision engineering. Proudly Australian-made, this solid-state nozzle delivers a targeted, reliable half-circle spray pattern specifically engineered to shield building frontages, walls, and perimeters from ember ignition and radiant heat. 

Designed strictly with the rigorous AS5414-2012 (Bushfire Water Spray Systems) standard in mind, this nozzle provides the water density required to maximize structural survival.

Key Advantages

• 100% Australian Made: Manufactured locally for maximum quality control and reliability.
• Solid-State Design: No moving parts to jam, fail, or seize up when you need them most.
• Pest-Resistant Port: The precision nozzle aperture is engineered small enough to naturally prevent insect blockages.

Technical Specifications

• Coverage: Shields a 6-metre property frontage per nozzle.
• Flow Rate: 8 Litres Per Minute (LPM).
• Operating Pressure: Designed for 350 KPa systems.
• Spray Pattern: Fixed half-circle (180-degree) perimeter fan.
• Material: Heavy-duty, solid 352 Grade Brass construction built for intense heat.

Installation & System Planning

To achieve maximum protection and create an unbroken wall of water along your perimeter:

• Recommended Spacing: Space nozzles 5 metres apart.
• Water Density Output: When spaced at 5m, the system delivers the optimal 5 L/m² (Litres per square metre) requirement to suppress fire threats.
• Optional Add-on: For ultimate peace of mind in high-insect areas, the nozzle can be fitted with a leashed blow-off cap to keep the port pristine until the system is pressurized.

Complete 360-degree protection for your home and surrounding environment. Proudly Australian-made, this solid-state nozzle delivers an omnidirectional spray pattern engineered to drench roofs, gutters, and asset protection zones to suppress ember ignition and intense radiant heat. Designed strictly with the rigorous AS5414-2012 (Bushfire Water Spray Systems) standard in mind, this nozzle provides the exact water density required to meet compliance and maximize structural survival. Key Advantages

• 100% Australian Made: Manufactured locally for maximum quality control and reliability.
• Solid-State Design: No moving parts to jam, fail, or freeze up when exposed to intense heat or ash.
• Pest-Resistant Port: The precision nozzle aperture is engineered small enough to naturally prevent insect blockages.

Technical Specifications

• Coverage: Fully shields a 6-metre roof or yard frontage per nozzle.
• Flow Rate: 8 Litres Per Minute (LPM).
• Operating Pressure: Designed for 350 KPa systems.
• Spray Pattern: Fixed full-circle (360-degree) radial drenching fan.
• Material: Heavy-duty, solid 352 Grade Brass construction built for harsh conditions.

Installation & System Planning

To achieve maximum protection and create an unbroken blanket of water over your roof or yard:

• Recommended Spacing: Space nozzles 5 metres apart. 
• Water Density Output: When spaced at 5m, the system delivers the optimal 5 L/m² (Litres per square metre) requirement to suppress fire threats.
• Optional Add-on: For ultimate peace of mind in high-insect areas, the nozzle can be fitted with a leashed blow-off cap to keep the port pristine until the system is pressurized.

Maximize your defensive boundary with heavy-duty radial coverage. This premium, imported Brass Impact Sprinkler Head is engineered for high-performance property protection, delivering a powerful, rotating water stream designed to saturate wide expanses of rooflines, yards, and asset protection zones.

Built from tough, durable brass, it provides a reliable mechanical rotation that handles harsh fire-season conditions and effectively knocks down flying embers before they reach your home.

Key Advantages

• Heavy-Duty Brass Build: Premium commercial-grade construction built to withstand intense radiant heat and debris.
• Wide-Area Saturation: Features a traditional impact-drive mechanism that systematically blankets large zones.
• Large-Scale Defence: Perfect for expansive roof ridges, large lawns, or open boundary protection lines.
• Cost-Effective Scalability: Wide coverage allows you to shield large properties with fewer total sprinkler heads.

Technical Specifications

• Inlet Size: 1/2" Male Thread.
• Coverage: Shields a 15-metre property or roof frontage per head.
• Flow Rate: 15 Litres Per Minute (LPM).
• Operating Pressure: Optimized for 350 KPa systems.
• Material: Corrosion-resistant, high-tensile solid Brass.

Installation & System Planning

To achieve an effective, overlapping blanket of water that leaves no dry spots for embers to take hold:

• Recommended Spacing: Space sprinkler heads exactly 10 metres apart.
• Overlapping Design: Spacing at 10m ensures a strong 5-metre overlap between units, providing a dense, unbroken barrier of water across your roof and yard.
• Pump Note: Because each head consumes 15 LPM at high pressure, ensure your firefighting pump is rated to handle the combined flow rate of your entire installed layout.

Command maximum defensive coverage for large-scale property protection. This heavy-duty, imported 3/4" Brass Impact Sprinkler Head is engineered for high-volume, maximum-distance saturation, delivering a powerful rotating water stream designed to blanket vast rooflines, expansive yards, and critical asset protection zones.

Built from tough, commercial-grade brass, its reliable mechanical impact-drive systematically knocks down flying embers and raises local humidity across massive frontages.

Key Advantages

• Maximum Boundary Defence: Covers twice the distance of standard 1/2" sprinkler heads, making it ideal for large rural properties and wide boundary lines.
• Commercial-Grade Brass Build: Premium, high-tensile construction engineered to withstand extreme radiant heat and harsh fire-season conditions.
• Fewer Units Needed: Ultra-wide coverage allows you to safeguard large structures and expanses using fewer sprinkler heads and less pipework.
• High-Volume Drenching: Rapidly saturates vegetation and structures to create a dense, fire-retardant barrier.

Technical Specifications

• Inlet Size: 3/4" Male Thread.
• Coverage: Shields a massive 30-metre property or roof frontage per head.
• Flow Rate: High-volume 30 Litres Per Minute (LPM).
• Operating Pressure: Optimized for high-pressure 350 KPa systems.
• Material: Corrosion-resistant, heavy-duty solid Brass.

Installation & System Planning

To achieve an impenetrable, overlapping blanket of water that eliminates dry spots where embers could ignite:

• Recommended Spacing: Space sprinkler heads exactly 15 metres apart.
• Overlapping Design: Spacing at 15m ensures a generous 15-metre overlap between units, providing complete, dense coverage across your asset protection zone.
• Important Pump Requirement: Because each head consumes a high-volume 30 LPM at high pressure, this system must be paired with a high-capacity, dedicated firefighting pump to operate as designed.